Jacy
Newbie
Joined: November/29/2006
Posts: 13
|
| Posted: January/31/2007 at 01:20 | IP Logged
|
|
|
Hi All,
I bought a computer about 2 years ago with a SATA RAID 1 (mirroring). When I first booted the system one of the drives was not recognized, so I unplugged and replugged the wires and the drive came up. I guess the wires have become loose during shipping.
Everything was working well. After almost 2 years now the same problem and I did the same solution. This is happening every now and then and it is very frustrating since it takes about 2 hours to rebuild. Disconnecting the cables is ridiculous. Is it just wires working loose or is something else going on?
Any suggestions are welcome!!!
|
Register 
Login
Data Recovery Software and Services Forum > RAID Drives
Topic: Loose connection
